Control.com - Nerds in Control

I need to test a couple of DNP 3.0 IO Servers, I was wondering if there is any simulator software that can be installed on a separate computer and using a serial null modem cable conecct it and simulate a DNP 3.0 slave.

Do you know something about it?

JOSE LUIS RODRIGUEZ BARROSO, Venezuela

Our DNP 3.0 OPC Server can be configured as a slave or master.

Both slave and master fully supports DNP subset Level 1, Level 2 and Level 3. Any Objects and variations in the slave can be placed in class 1, class 2 or class 3.

Serial Link, TCP/IP and UDP/IP are supported.

ioserver@ioserver.com
http://www.ioserver.com/

Hello,

As I see from your mail to A-List, you wrote DNP 3.0 server.
So, you have whole DNP standard.
Can you mail it to me or just place it on any www or ftp site?
I write simulators and servers too for our system. I have some
protocols, some already done servers and Modbus serial simulator
(it can simulate a big network with a lot of nodes).
Now I'm finishing simulator for AdLink network (Advantech
Adam-4000 series modules, ICP DAS I-7000 modules, NuDAM Nu-6000
modules and so on).
If you mail me the standard I would write the DNP simulator.
By the way, I daon't make a secrets from my code so all of my
projects is open-source.

Thank you.

--
Best regards,
Alexander Beketov jr.
Mariupol, UKRAINE
ICQ UIN 42118785
SMS: 3476867@sms.umc.com.ua
mailto:beketov@anet.donetsk.ua

The DNP Standard is published and maintained by the DNP Users Group (http://www.dnp.org)

Any body can join the group, All members have access to the DNP Documentation, technical bulletins and user forum.

ioserver@ioserver.com
http://www.ioserver.com/

Hello Jose,

We have a comprehensive DNP 3.0 Slave Simulator called simSCADA.

This provides protocol simulation of as many RTUs as you want, with an underlying database of the I/O.

Please see our web sites for more information:

www.simSCADA.com
www.opalsoftware.com.au

Regards

Bill Tarlinton