Control.com

Port Forwarding

Search Forums New Posts
J

Thread Starter

Jeff

Hi there.

I have a Modicon M340 with processor BMXP342020, a Magelis XBTGT4230 HMI and a SixNet cellular modem for remote connection to these devices. I have to set up the port forwarding in the modem. Does anyone know, what port numbers must I direct an incoming connection to for a) imbedded web server and b) programming port, for both the PLC and the HMI? My assumption would be Port 80 for the web server and Port 502 for the programming port, but these do not seem to work through the modem.

Thanks.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
osmangoni tatsuno, gilbarco, wayne fuel dispensers Communication Protocol for RS485 port General Communications Chat 0
R MOOG Servo Valve 761 X Port Control Valves 3
S Purpose of the RJ45 port on the front of Triconex CPU cards (MP3008 and MP3009) Programmable Logic Controller - PLC 0
B Port Forwarding External IP to PLC Networking 1
A MODBUS TCP (Port Forwarding of GSM Router) Modbus 4
Similar threads
tatsuno, gilbarco, wayne fuel dispensers Communication Protocol for RS485 port
MOOG Servo Valve 761 X Port
Purpose of the RJ45 port on the front of Triconex CPU cards (MP3008 and MP3009)
Port Forwarding External IP to PLC
MODBUS TCP (Port Forwarding of GSM Router)

You May Also Like

Top