G
Goodmorning everyone,
I'm working on a control system with redundant PLC 5 through the 1785-BCM modules.
The system is interfaced via 3100-MCM modules with an Intouch HMI.
I cannot find a way to command from HMI, and then from logic in the PLC, a switchover between controllers.
Do you have any suggestions?
Thanks in advance.
Gianluca
I'm working on a control system with redundant PLC 5 through the 1785-BCM modules.
The system is interfaced via 3100-MCM modules with an Intouch HMI.
I cannot find a way to command from HMI, and then from logic in the PLC, a switchover between controllers.
Do you have any suggestions?
Thanks in advance.
Gianluca