Looking for Industrial Hub

  • Thread starter ANTONISHEN Robert -CMMRCL SYS
  • Start date
A

Thread Starter

ANTONISHEN Robert -CMMRCL SYS

I'm looking for any source of industrial Ethernet hubs/switches, having up to 4 10BaseT with one BNC 10Base2 connector as well. Must be DC powered, and "rugged", i.e. screw terms on the power feed, not a phono jack, etc.

Thanks,
------------------------------------------
Robert Antonishen, P.Eng.
Sr. Eng - IMO Integration Project
Commercial Systems - Commercial Operations
Ontario Power Generation
phone 416-592-1510 fax 416-592-2889
[email protected]
------------------------------------------
 
B

Bill Szuminski

Try Hirshmanns out of Germany or Schneider Automation Transparent Factory. Both have Industrial Ethernet solutions. Fiber as well as cable.
 
D

Darold Woodward

I would also suggest Dymec. They are producing Ethernet media converters and hubs that surpass typical industrial requirements and are used in utility environments. For example, their operating temperature is -40 to +85 degrees C.

Darold Woodward PE
SEL Inc.
[email protected]
 
Top