E
Hello.
I'm a newbie to this so please take it slow...
I have installed a smarthouse solution from carlo gavazzi. It's called "smarthouse". It use the dupline bus to communicate from the master to the light switches, temp sensors, smoke detector etc...
On the Master I can communicate by modbus. And my challenges is to get the master to communicate via modbus to my linux computer running MBLogic.
I selected MBLogic for its free license and web opportunities. Don't now if it's the best. But I found it
I have been trying to get something up. Installed Mblogic just fine. Every thing up. But I don't understand how to set it up to talk to the dupline master.
I have found som background info.
Dupline Mastergenerator via Modbus Driver
http://80.203.81.121/dupline/G3-DUPLINE.pdf
Dupline Mastergenerator
http://80.203.81.121/dupline/bh8_ctrlzx_man.pdf
Modbus Application Protocol
http://80.203.81.121/dupline/Modbus_Application_Protocol_V1_1b.pdf
Master Module G34960005 Dupline Mapping
http://80.203.81.121/dupline/Master Module G34960005 Dupline Mapping.xls
Modbus interface module
http://80.203.81.121/dupline/GTI50.pdf
In the dupline system I use A1 to P8 to program different things.
From what I understand from modbus I can set A1 to high/low with som hex code.
Please help me understand more.
Espen
I'm a newbie to this so please take it slow...
I have installed a smarthouse solution from carlo gavazzi. It's called "smarthouse". It use the dupline bus to communicate from the master to the light switches, temp sensors, smoke detector etc...
On the Master I can communicate by modbus. And my challenges is to get the master to communicate via modbus to my linux computer running MBLogic.
I selected MBLogic for its free license and web opportunities. Don't now if it's the best. But I found it
I have been trying to get something up. Installed Mblogic just fine. Every thing up. But I don't understand how to set it up to talk to the dupline master.
I have found som background info.
Dupline Mastergenerator via Modbus Driver
http://80.203.81.121/dupline/G3-DUPLINE.pdf
Dupline Mastergenerator
http://80.203.81.121/dupline/bh8_ctrlzx_man.pdf
Modbus Application Protocol
http://80.203.81.121/dupline/Modbus_Application_Protocol_V1_1b.pdf
Master Module G34960005 Dupline Mapping
http://80.203.81.121/dupline/Master Module G34960005 Dupline Mapping.xls
Modbus interface module
http://80.203.81.121/dupline/GTI50.pdf
In the dupline system I use A1 to P8 to program different things.
From what I understand from modbus I can set A1 to high/low with som hex code.
Please help me understand more.
Espen