C
I have arrived on site and the local operator is complaining they can't run the AC lube oil pump for the turbine in manual. They want this for flushing and to check why the system is not making pressure.
Previous sites usually have the option to put the switch gear into local and start/stop pump, but this is not the case here. So should they have the option via the HMI or switchgear to start/stop the pump?
Previous sites usually have the option to put the switch gear into local and start/stop pump, but this is not the case here. So should they have the option via the HMI or switchgear to start/stop the pump?