Hi,
Does anyone have experience collecting engine data from ComAp using Modbus?
I can establish the communication, but I can't get all the engine data required such as the fault code.
I'm using P+F Master Device Gateway. Below is the only data captured.
I attached also the Modbus IO list for reference.
Thank you.
Does anyone have experience collecting engine data from ComAp using Modbus?
I can establish the communication, but I can't get all the engine data required such as the fault code.
I'm using P+F Master Device Gateway. Below is the only data captured.
I attached also the Modbus IO list for reference.
Thank you.
Attachments
-
245.4 KB Views: 3
-
37.2 KB Views: 3