P
hi there hope someone can help me here..!!!
im doing a new project involving two serial ports of the computer. firstly, i have interfaced the 1st serial port to a 8051 microcontroller to get data from the microcontroller.
the second serial port is connected to a nokia 30 gsm connectivity terminal (it can be a gsm modem or a gsm phone).
My question here is how can i use visual basic codes to read input from the 1st serial port (which is the microcontroller) and when there is a specific input, this visual basic should send data (in this case a sms ) to the gsm phone through the 2nd serial port. This sms should be sent automatically when there is an input from the 1st serial port.
please if anyone can help me, send me the codes or any information.
your help is much appreciated..!!!
thanks
my mail add: [email protected]
im doing a new project involving two serial ports of the computer. firstly, i have interfaced the 1st serial port to a 8051 microcontroller to get data from the microcontroller.
the second serial port is connected to a nokia 30 gsm connectivity terminal (it can be a gsm modem or a gsm phone).
My question here is how can i use visual basic codes to read input from the 1st serial port (which is the microcontroller) and when there is a specific input, this visual basic should send data (in this case a sms ) to the gsm phone through the 2nd serial port. This sms should be sent automatically when there is an input from the 1st serial port.
please if anyone can help me, send me the codes or any information.
your help is much appreciated..!!!
thanks
my mail add: [email protected]