Hi all,
I have a S7-1211 PLC which I'm using to learn PLC programming. I can connect to the PLC from my PC and program it using TIA portal V18. When connected as below.
But now I want to use PC HMI. If I connect to the PC Station as below. I can no longer go online to the PLC.
Anything I've found so far on Youtube shows the above configuration working, but in simulation. Not with a real PLC.
Help greatly appreciated.
Daragh
I have a S7-1211 PLC which I'm using to learn PLC programming. I can connect to the PLC from my PC and program it using TIA portal V18. When connected as below.
But now I want to use PC HMI. If I connect to the PC Station as below. I can no longer go online to the PLC.
Anything I've found so far on Youtube shows the above configuration working, but in simulation. Not with a real PLC.
Help greatly appreciated.
Daragh