C
Hello,
We have to replace the old HMI on N2 unite with a new one. The old HMI is Magelis XBT P021110 (model obsolete), and the new one is Magelis XBT R410. Once I have installed the HMI, it could not communicate with the PLC and need to install the Firmware version 4.5.
I tried to upload the firmware from the old HMI with the software Vijeo Designer Lite but with no success. I need to have the XBT L1000 software which I do not have.
Could any one can guide me if it is possible to get the firmware from the PLC TSX Momentum.
if there is any other solution, please advice.
Regards
Hamza CHERIF
We have to replace the old HMI on N2 unite with a new one. The old HMI is Magelis XBT P021110 (model obsolete), and the new one is Magelis XBT R410. Once I have installed the HMI, it could not communicate with the PLC and need to install the Firmware version 4.5.
I tried to upload the firmware from the old HMI with the software Vijeo Designer Lite but with no success. I need to have the XBT L1000 software which I do not have.
Could any one can guide me if it is possible to get the firmware from the PLC TSX Momentum.
if there is any other solution, please advice.
Regards
Hamza CHERIF